PROGRAMMING INSTRUCTIONS
SETTING
THE CLOCK
- Press and hold MAGIC until the display screen changes from [DEVICE and the TIME] to [TIMED SEQ].
- Press the MENU - key twice, the display will change to [CONFIGURE].
- Press SELECT, the display will change to [THEATR SEL].
- Press MENU - one time, the display will change to [TIME SET]. Press SELECT again. The display will change to [TIME] and the first digit in the time will blink. Enter either a 0 or a 1, then the next digit in the time will begin to blink, continue entering the time until all four digits of the time have been set.
- After the time has been set, AM/PM will then blink. Press MENU – to toggle between AM and PM, once AM or PM is selected, press SELECT.
- The display will then change to the day of the week (MON, TUES, WED, THURS, FRI, SAT or SUN). Use MENU - to toggle through the days until the proper day of the week is displayed on the screen, then press SELECT. The display will return to the [DEVICE and the TIME] screen with the correct time on the display.
To Quickly Set Up the A/V Producer to Operate Your Home Entertainment
Components
- Turn on all of the components that you will be setting up.
- Press and release the TV key.
- Press and hold MAGIC until the display screen changes from [TV and the TIME] to [TIMED SEQ].
- Press the MENU - key one time. The display screen will change to [CODE SET UP]. Press SELECT. The display will change to [DEV SETUP]. Press SELECT. The display will change to [TV}.].
- Enter the first TV code listed for your brand in the “Set Up Codes for TVs” then press SELECT. Point the remote control at the TV and press POWER. Your Television should turn OFF. If your TV does not turn OFF, enter the next code in the code list then press SELECT followed by POWER again. Once your TV turns OFF, press VCR.
- You will now enter your VCR code.
- Enter the first VCR code listed for your brand in the “Set Up Codes for VCRs” then press SELECT. Point the remote control at the VCR and press POWER. Your VCR should turn OFF. If your VCR does not turn OFF, enter the next code in the code list then press SELECT followed by POWER again. Once your VCR turns OFF, press CBL. You will now enter your Cable Box code.
To Set Up Your Television
- Press and release the TV key.
- Press and hold MAGIC until the display screen changes from [TV and the TIME] to [TIMED SEQ].
- Press the MENU - key one time. The display screen will change to [CODE SET UP]. Press SELECT. The display will change to [DEV SET UP].
- Press SELECT and the display screen will change to [TV].
- Enter the first TV code listed for your brand in the “Set Up Codes for TVs” , then press SELECT. Point the remote control at the TV and press POWER. Your Television should turn OFF. If your TV turns OFF, press the ESC key to return the display to [TV and the TIME]. If your TV does not turn OFF, enter the next code in the code list then press SELECT followed by POWER again. Once the correct code is entered, press the ESC key to return the display to [TV and the TIME].
To Set Up Your Cable Box
- Press and release the CBL key.
- Press and hold MAGIC until the display screen changes from [CBL and the TIME] to [TIMED SEQ].
- Press the MENU - key one time. The display screen will change to [CODE SET UP]. Press SELECT. The display will change to [DEV SET UP].
- Press SELECT and the display screen will change to [CBL].
- Enter the first Cable Box code listed for your brand in the “Set Up Codes for Cable Boxes” , then press SELECT. Point the remote control at the Cable Box and press POWER. Your Cable Box should turn OFF. If your Cable Box turns OFF, press the ESC key to return the display to [CBL and the TIME]. If your Cable Box does not turn OFF, enter the next code in the code list then press SELECT followed by POWER again. Once the correct code is entered, press the ESC key to return the display to [CBL and the TIME].
For More
