- There are 2 way of adjusting this TV: One is with the REMOTE CONTROL UNIT and the other is the conventional method using adjustment parts and components.
- The adjustment with the REMOTE CONTROL UNIT is made on the basis of the initial setting values. The setting values which adjust the screen to its optimum condition may differ from the initial setting values.
- Make sure that connection is correctly made to AC power source.
- Turn on the power of the set and equipment before use, and start the adjustment procedures after waiting at least 30 minutes.
- Unless otherwise specified, prepare the most suitable reception or input signal for adjustment.
- Never touch any adjustment setting value, which are not specified in the list for this adjustment.
- Preparation for adjustment. Unless otherwise specified in the adjustment instructions, preset the following functions with the REMOTE CONTROL UNIT.
User mode position
PICTURE MODE (VSM): BRIGHT
VNR: OFF
COLOUR / BRIGHT/CONT. / SHARP: Refer to VSM PRESET
BLUE BACK: OFF
OFF TIMER: OFF
ECO
SENSOR: OFF
AUTO SHUT OFF:
OFF
KEY OPERATION OF SERVICE MENU
- Press the DISPLAY key and the PICTURE MODE key of the REMOTE CONTROL UNIT simultaneously. Then enter the SERVICE MENU.
- When complete the adjustment work, press the DISPLAY key to return to the SERVICE MENU. And then press the DISPLAY key again, return to the normal screen.
- In SERVICE MENU, press the number (1~6) key of the remote control unit, to select any of the adjustment items.
ADJUSTMENT USING SERVICE MENU
The
following adjustment items use the SERVICE MENU in the series of the adjustment.
The adjustments are made on the basis of the
initial
setting values. The adjustment values which adjust the screen to the optimum
condition can be different from the initial setting values.
With the
SERVICE MENU, various settings can be made, and they are broadly classified in
the following items of settings.
- IF: Adjustment of the IF circuits.
- V/C :Adjustment of the VIDEO/CHROMA circuit.
- DEF: Adjustment of the DEFLECTION circuit.
- VSM PRESET: Adjustment of the initial setting values of VSM condition as STANDARD, SOFT and BRIGHT. (VSM : Video Status Memory)
- PRESET: Adjustment of the RF circuit [Do not adjust].
- TURBO TIMER: For quick setting the TIMER count value, adjustable not only by minuets but also by second. [Should be OFF].
METHOD OF SETTING
- IF. [1. VCO]
1 Key: Select 1.IF.
1 Key: Select 1.VCO
The VCO
(CW) screen will be displayed a allow mark when the AFC voltage is at a certain
level.
DISPLAY
Key: When this is pressed twice, you
will return to the SERVICE MENU.
- DELAY POINT
1 Key: Select 1.IF.
2 Key: Select 2.DELAY POINT.
MENU
-/+: Set (adjust) the setting values
of the setting items.
DISPLAY
Key: When this is pressed twice, you
will return to the SERVICE MENU.
- V/C, 3.DEF and 4.VSM PRESET
MENU ▼/▲ Key: Select setting items.
MENU
-/+: Adjust the setting values of the
setting items.
DISPLAY
Key: When this is pressed, return to
the SERVICE MENU.
- TURBO TIMER
By pressing
the 6 key, you can change the ON or OFF ( should be OFF). If it is
ON, the timer in TIMER mode changes from 1 minute into 1 sec temporarily. (It is easier to checks the Operation of
TIMER)
If you turn
the TV power off, this setting becomes OFF automatically.
