PROGRAMMING PROCEDURE
- Switch ON the TV manually or use the original remote control for this. Tune to channel 1.
- Press and hold the [TV] device selection button for 5 seconds until it blinks twice and then remains lit. The remote control is now in setup mode.
- Look up the 4-digit code for your brand. Use the digit buttons to enter the code for your brand. The [TV] key will now blink twice and then remains lit. If the key blinks twice fast, the code has not been entered properly or the wrong code has been entered. In this case, try again.
- Aim the remote control at the TV. Press and hold the [POWER] button. Release it immediately release it as soon the TV switches off. This may take up to 30 seconds.
- Switch ON the TV. Try out the buttons you need for operating it. Try, for example, if the - PROG + and digit buttons function properly. If a button does not work as expected, press and hold that button. Release it immediately as soon as it works.
- Press the [TV] device selection button twice to finish setup.
If
you made a mistake: Press the device
selection button twice to
exit setup. Restart from the
beginning.
If the device does not respond at all or not to all
of the button commands or if you cannot find the code for your brand, enter ‘9,
9, 9, 9’ in step 3 and continue with step 4.
The remote control will now search its full database for a code that
works with your TV. Full database search may take up to 15 minutes.>>> FOR MORE >>>
