DAEWOO DTQ-29U1SC - SERVICE MODE & ADJUSTMENTS

TO ENTER SERVICE MODE [FACTORY MODE]

• Turn the set on.
• Direct the remote control to the reception window of TV.
• Push buttons of remote control in sequence as follows.
• {1 à MUTE à DISPLAY à MUTE}

The screen will appear as follows

========================

S2                          SCRN

S5                          SND

S6                          GEO

S7                          VDP

S8                          W/B

S9                          DP

S12                       FACT

=======================

• Using the channel up or channel down button, select the item you wish to adjust.  (The color of selected item turns into the red.)
• Press the volume up or down button to enter in the service mode you wish to adjust.

{{Must press DISPLAY button the state which the screen is displaying each of service menus after all adjustments are completed each of all service menu.}}

SCREEN VOLTAGE ADJUSTMENT

1. Enter the service mode and select service adjustment S2.
2. You can see the one horizontal line on the screen.
3. Adjust the Screen Control Volume (located on FBT) so that the horizontal line onscreen may be disappeared.
4. Press the volume up or down button to exit in the screen adjustment mode.

[IN THE SCREEN ADJUSTMENT MODE, DON'T PRESS OTHER BUTTONS EXCEPT VOLUME UP OR DOWN BUTTON.]