SERVICE MODES [SANYO TVs]
TVS-1430MA _ TVS-2142MA _ TVS-2152PF & OTHER CHINESE
MODELS _ USING TMPA8823 _ TMPA8859 Ics
- Two modes: S and D to enter the mode S, press VOL-on the TV to 0, keep pressed, and press DISPLAY on the C /R.
- To enter the mode D, as once inside S, select the VP60, must be set: 00, then press [VOL-] on the TV without release, press DISPLAY on the C / R. for change channels or other user setting.
- To exit the service mode, press DISPLAY
SANYO chassis C20LB94M LA4-A
- Use the remote control of the user.
- To enter the mode SERVICE MENU key pressed to have the TV and press the 2 key on the remote.
- To adjust the fine tuning of a channel, having pressed the MENU button on the TV and press the key MENU on the remote.
The Sanyo TV TVS-1428MA used in Central America, uses ICs LC863232A,
the LA76812, etc.
- To enter the service mode with recall to the remote and Vol (-) in front of the TV pressed simultaneously, then repeat the operation to switch into different categories: B / W, Adjust and Setup.
Sanyo LA4-A chassis C20LB94M
- Turn on the TV. Press TV's memory for a couple of seconds.
- Once this is done and before within three seconds, press the remote's memory.
- Then press on the remote Sound and choosing the option to change.
- Make the necessary changes with the [VOL + and VOL -]
SANYO C20LB94M
- Hold down the MENU button on the TV and press the 2 button on the remote control.
- To adjust the fine tuning, press and hold MENU button on the TV and press the MENU on the C / R.
OR
- With the TV on, press M (memory) in the TV within two seconds, immediately
- Press MEMORY on the C / Remote, then SOUND to select the item.
- With VOL [+ / - ] to adjust settings.
OR
- Hold the MENU button down while connecting the TV to the mains.
- Use CH [+ / -] to scroll and VOL [+ / -] to adjust the values.
- To exit and save changes: MENU
OR
- Turn on the TV. Press TV's memory for a couple of seconds.
- Within three seconds, press the remote's memory.
- Then press on the remote Sound and choosing the option to change.
- Make the necessary changes with the [VOL + and VOL -]
