BENQ - EZ 2400HD LCD TV _ SERVICE MODE _ ADJSUTMENTS

TO ENTER SERVICE MODE

• Turn Off the monitor, keep pressing the "Menu" + "Enter" buttons, and turn On the monitor, then press "Auto" button.   The factory OSD will be at the left top of the panel.

• Trigger method:  Press "Menu" key and Power On.
• Press the Menu key will display the Service Page.
• Press Menu key will Close the Service Page.
• Power Off will Quit the Service Mode.
• At the Service Mode, the key function is same as normal OSD define.
• The timer can only reset at the Service Mode by "Timer Reset".  And need to have warning message to double confirm the reset function.  The timer should record upto '99999' Hours.
• Add one select item for HDCP [DVI port], Mode-1, Mode-2 at Service Menu:

1. Mode-1:  To enable the hot plug pin detection . [HDMI port default]
2. Mode-2:  To disable the hot plug pin detection.  [DVI port default]

• Add BenQ log On / Off item, the default is On.
• Add auto power On item, the default is Off.
• Add timer reset warning message, when select the timer reset item,  then the warning message will display, and need to confirm it again, and the default is No.
• Panel type define need to have the panel version.
• F/W version need to define the dual or analog model.