GRUNDIG - 32LXW 82-8600DL 26LXW68-8600 DL VIVANCE II 32LXE82-6711 SERVICE MODE AND ADJUSTMENTS

PRODUCT AND DISPLAY VARIANTS
Following TV sets are fitted with chassis LM as well as chassis LX:

• 22LXW 68-8600DL
• 32LXW 82-8600DL

The chassis types can be identified by the design and type shield.

DISPLAY AND PRODUCT CODE

• Depending on availability of displays of different manufacturer are built in.  This results in different chassis mountings as well as different software.  Before changing the main board, check whether the labels on the boards are identical.   

CHANGE OF MAIN BOARD OR IC-306.

• After changing the main board, or IC306, all basic settings in the Service Mode must be done.

PROGRAMME SEARCH

• Press button "I" [Main Menu]
• Select 'Setup' with buttons P + | P - , and confirm with button "OK".
• Select 'Autoprogram' with buttons P + \ P - , and confirm with button "OK".
• Select required country with buttons P + \ P - , ( < ) | ( > ), and confirm with 'OK".  The auto program system stops at every station data and the respective standard automatically and stores the data.  The system then continues searching.  
• Pressing the "I" button stops the program search. 

EEPROM EDIT

• This function is only for development and is only allowed to use by special demand.  Any incorrect setting may cause a defective set.

HOTEL MODE

• Maximum volume is limited, and there is no access to "Preset List" and "Setup" is activated at hotel Mode.
• Call up: "I" => 8500 => P + \ P- "Option 1" => P + \ P - "Hotel" => ( < ) | ( > ) "Avail".
• maximum Volume:  "I" => 8500 => P + | P- "Option 1" => ( > ) => P + \ P- "Hotel volume" => ( < ) | ( > ) Value  0 .... 63.

SPECIAL FUNCTIONS AT ACTIVATED HOTEL MODE.

• The maximum volume can be adjusted in the additionally menu item 'Maxvol' in the sound menu.
• In addition there is access to the menus "Preset List" and "Channel Setting" until the set is switched Off [Standby].
• Call up:  "I" => Sound => "OK" => 4658.

DISPLAY

• If no picture is visible because of a wrong panel is adjusted, can change the setting by "Blind" adjust. The following sequence of operating steps must be repeated until the picture is shown on the panel.  
• Call up:  "I" => 8500 => ( > ) => "P -" 4 times => ( > ) => "TXT" =>  Switch set Off and On.  If the picture is visible, then repeat the sequence once again and thereby adjust the correct type of panel (according to display panel).

ACTIVATING THE PARENTAL LOCK

1. Select the TV channel with P + \ P- , or '1 to 0'
2. Press "i" to open the Main Menu.
3. Select 'Features' with P + | P - , and confirm with "OK".
4. Select "Parental Lock" with P + \ P - , and confirm with "OK".
5. Activate the 'Parental Lock' with  (< ) | ( > ) {On}
6. Press "i" to finish the setting.

TO DE-ACTIVATE PARENTAL LOCK

• Follow the steps 1 to 4 as above.
• Switch OFF the parental lock with (<) | (>) button.
• Press "i" to finish the setting.

SERVICE AND SPECIAL FUNCTIONS

• I  > Call up the Dialogue Center / Close down the Menu.
• P+ / P-  >  Call up the Dialogue line. (point of menu).
• (>) | (<)  > Call up Menus / Changing settings.
• TXT  > To Exit Service Mode.

CALLING UP THE SERVICE MODE.

1. Press button "I" {Info}.
2. Enter code {8500}.

Exit Service mode:  Press 'TXT' button.