BACK COVER OPEN
Remove marked screws on the back cover.
Open back cover
Removal of stand guide
Removal of back bracket.
Remove antenna cable jut.
Remove inlet shield cable from SMPS board.
Remove inlet Ground cable.
Remove power inlet from back bracket.
Remove speaker cable connected sub board from back bracket.
remove back bracket.
Removal of Cables.
Remove power control cable from SMPS and LCD module.
Remove LVDS cable connected LCD module and main board LVDS connector unit.
Remove Power cable [11pin] connected SMPS and Main board.
Remove Power cable [10 pin] connected SMPS and sub board.
Remove inverter cable 2 connected SMPS and main board.
Remove inverter cable 1 connected LVDS board in the LCD module and module lamp unit.
Remove data cable [10pin] connected main board and sub board.
Remove Ground cable on upper left side of Main board and disconect OSD cable that connects OSD board located beneath of Extrusion Bar and OSD connector unit on main board.
Removal of Power Supply and VSC board
Remove screws on Main board and Sub board.
Remove SMPS board.
Replaceable parts.
Boards and part numbers
Main board => 20TPD033
Sub board => 20TPD028
SMPS => 20TP046
OSD board => 20S90014
Inverter cable A => 3HN30033
LVDS cable [31pin] => 3HN20047
No comments:
Post a Comment