POLOROID FLM-4034B FLM-4232HM FLM-4234BH BOARD REPLACEMENT Password Unlock

Contn:
                                            [2]
Can't Power On TV?
This TV is equipped with a safety switch.  In the event of electrical storm or power outage the safety fuse is designed to protect the TV.  If TV has no Power, check this fuse by prying the cover off, following the illustration below.  If the fuse is blown, replace it with a [4A-250V - 5x20mm size]   fuse, Time Lag Fuse - Slow Blow type.

Having trouble with setting Parental Control {V-Chip]
The factory preset password is '0000'.  This password must be used first before setting  your own personal password.  In the event the password is lost,  the Master Password is [8202].  This master password overrides all passwords.  The Master password can't be changed and should be kept in a safe place away from children.
A/V BOARD REMOVAL AND REPLACEMENT

• Disassemble control box cover, and rear cabinet cover and remove A/V ass'y.
• Using a small pair of wire cutter's grip the side-locking tabs and pivot back towards the A/V cable connector [PIC1].  Locking tab should only pivot about 45 degrees.  do the same for opposite side of the A/V ass'y.
• Slide out A/V board and replace [PIC2].
• Push locking tabs in to secure replaced A/V board.

FRONT / SIDE CONTROL BUTTONS REMOVAL AND REPLACEMENT

• Disassemble control box cover and rear cabinet cover.
• The control button board is attached with Glue.  Use alcohol to soften the Glue and remove the control button board [PIC1].
• Replace the control board and use glue to fasten  to front bezel.  

FLM 4034B _ EXPLODED VIEW

FLM-4232HM _ FLM-4234BH _ EXPLODED VIEW