UPDATE PROCEEDINGS
- For main board upgrade: Connect the cable of ISP burning device to Debug port (X107) of main board; for TV set upgrade, connect both VGA ports of ISP burning device and main board, enter into factory menu and set item “ISP Mode” as “ON”
- Using Mstar online burning program (V4.4.2.0 or higher versions), enter into menu “Device”, tick option “WP Pin pull to high during ISP” to ensure that hardware write-protect of Flash is removed and erasing process is normal.
- Press menu “Connect”, a dialog box “Device Type is MX25L64” will pop up, that is, connection has been successful.
- If the connection is failed, press the first menu “Device” and select its option “MX25L64”, then press menu “Connect” again.
- Press menu “Read”, select the burning file, such as “MERGE.bin”.
- Press menu “Auto”, tick options “All chip” and “program.
- Press menu “Auto”, tick options “All chip” and “program.
- First, the step “Erasing, Flash Status: 03” will last for some time, or it is failed if it is passed by quickly, please confirm procedure 2 and begin burning process again; then the following step is “Programming -- Flash Status:00”; at last, a prompt “Pass” will display.
- A prompt “Pass” will display beside button “Run” if burning process is successful.
METHOD OF ONLINE BURNING THROUGH USB
- Make sure that U disk is formatted as “FAT32.
- Copy firmware “Merge.bin” to U disk.
- Power on TV set, be sure to be in channel of ATV or DTV and have not any OSD interface, insert U disk into USB port of TV set.
- First press key “SOURCE”, then press keys “2, 5, 8, 0” in turn to enter into initial factory menu.
- Select item “software update” to begin upgrade.
UPGRADE PROCESS
- Read data from U disk, while data indicator light of U disk is twinkling at the same time; Begin to burn Flash，the unit will be in “standby” mode after burning process completed.
- Restart the unit after power-off of hardware, then enter into factory menu, confirm software parameters - version and time, execute item “RESET ALL” to complete the whole process.
USB burning method could not be sure to all kinds of U disks, so please try another U disk if one is inapplicable.
