How to enter service mode to Apex TVs
TO ENTER AND EXIT SERVICE MODE
- Decrease volume to 0.
- Press the MUTE button on the remote control and VIDEO button on the TV at the same time.
- Adjust the TV with the MENU SELECT buttons on the remote control.
- Press the ‘Power’ button on the remote control to quit the Service mode.
- The option data in the above table may differ depending on models, UOC chips and CRTs used.
- It is required to check if the data comply with the function requirements of your TVs.
- For PF2720 and PF3220 models, OP1 is set to 158, OP7 to 175 and OP8 to 100 when using TDA9375 or OP1 is set to 158, OP7 to 175 and OP8 to 100 when using TDA9379.
- For PF2730 and PF3230 models, OP1 is set to 158, OP7 to 191 and OP8 to 101 when using TDA9375 or OP1 is set to 190, OP7 to 191 and OP8 to 101 when using TDA9379.
