Wednesday, December 19, 2012

APEX GB43HD09_GB51HD09_GB55HD09W_GB65HD09W_ RPTV _ SERIVCE MODE AND ADJUSTMENT & SELF CHECK



TO ENTER SERVICE MODE

  • Decrease the Volume to [0] by pressing Volume (-) button on the remote control.
  • Press ‘MENU’ on the front panel of the TV while pressing and holding the ‘MUTE’ on the remote control to display “S” on the upper left corner of the screen.
FUNCTION OF SERVICE MODE

MCU controls the operation of ICs via IIC bus.  In service mode, the items are adjusted by the remote control.
In the Service Mode:
Press "PIP CH+" repeatedly to scan through the following menus.
Press "CH +/-" to select an item, and press "VOLUME +/-" to adjust the data value to selected item.

MENU-1

MENU-2 & 3



MENU-4


MENU-5


The values in Menu-2 and Menu-5 are averages or definite values at the factory. Only adjust the values allowed to adjust and do not change those are not allowed to do so.  Otherwise it will cause the TV to run improperly.  

SELF CHECK
Self check is used to check the ICs and function modules of the TV.  Press "PIP CH+" to display the following menu when in the service mode.


"ERROR" instead of "OK" displays when something wrong with ICs

Displays
Position number
IC functions
Circuit boards

TDA9332
N005
RGB PROCESSING, H/V ACTIVATING
MAIN CHASSIS
TEA6425
NV04
VIDEO SWITCHING
AV BOARD
TEA6420
NV02
AUDIO SWITCHING
AV BOARD
TUNERM
N002
MAIN TUNER
MAIN CHASSIS
MSP3440
NV01
BTSC SOUND PROCESSING
AV BOARD
TUNERP
N001
SUB-TUNER
MAIN CHASSIS
VPX3226
U14
PIP DECODING
FB BOARD
EEPROM
U3
MAIN MEMORY
MCU BOARD
EXTRAM
U7
EXTERNAL RAM FOR MCU
MCU BOARD
SPI
     --------
CONVERGENCE MODULE
CONVERGENCE BOARD.