PUBLIC MODE
- Turn "ON" the "Public mode" on Page 1 of the adjustment mode.
- Turn off TV by pressing MAIN POWER switch.
- While pressing "VOL(+)" key and "CH (^)" key at the same time, press MAIN POWER switch for more than 2 seconds.
- TV will turn on, and you will see the screen display setting of Public mode.
Setting
screen of "Public mode"
=======================================
Public Mode
Maximum volume [
60]
Volume fixed [Variable ]
Volume fixed level [ 20]
RC button [Respond ]
Panel button [Respond ]
Menu button [Respond ]
On screen display [Yes ]
Input mode start [Normal ]
Input mode fixed [Variable ]
Sound only mode [No ]
Reset
Enter
============================================
- Can select each item of functions by pressing cursor UP/DOWN keys or CH(UP)/(DN) Keys on the remote control or CH(UP)/(DN) keys on the LCD TV. The letter of selected item turns to yellow colour when you selected it.
- The setting position of each item of functions are made by pressing cursor RIGHT/LEFT keys on the remote control or VOL (+)/(–) keys on the LCD TV.
- Select ENTER position after you set all functions, and press cursor RIGHT/LEFT keys on the remote control or VOL(+)/(–)keys on the LCD TV for confirmation. Unless otherwise you make ENTER confirmation, the settings will not be memorized.
- To Exit the Public mode, call the "Public mode" setting screen first and then select the "Reset" position. Now press the (Flash back) key on the remote controller.
*6 FUNCTIONS OF PUBLIC MODE SETTINGS EXPAND FOR PUBLIC APPLICATION.
- Maximum volume (0—————60). You can set the maximum volume at your desire level.
- Volume fixed(Variable / Fixed). You can fix the sound volume at your desire level. When you set to "FIXED", the sound volume which you just set is fixed.
- Volume fixed level (0—————60). You can set the Volume fixed level at your desire level.
- RC button (Respond / Limited / No respond). If you set "Limited", remote control keys of POWER, CH(UP)/(DN), VOL(–)/ (+) and BRIGHT keys are responded, but other keys are not responded. This is a position that you can not make MENU adjustments.
- Panel button (Respond/No respond). No Respond means that the TV does not respond when you press a user control buttons except main power button on the main unit.
- Menu button(Respond /No respond). With "No Respond" selected, the remote controller and the set's MENU key are disabled.
- On screen display(Yes / Limited). If you set "No" position, OSD will not appear.
- Input mode start (Normal ß> TV(CH1) ß> COMPONENT ß> AV1 ß> AV2 ß> AV3). When any other item than "Normal" has been selected, the set gets started in the selected input mode or channel at the next switch-on.
- Input mode fixed (Variable / Fixed). (* This item cannot be selected if the start mode is "NORMAL".). If "FIXED" has been selected, any channels and input modes other than those selected in the start mode cannot be picked up.
- Sound only mode (No / Yes). (* This item cannot be selected if "NO" appears on the on-screen display.). Let's suppose that this item has been selected and the BRIGHT key on the remote control has been pressed. The item "BRIGHTNESS [OFF]" can now be selected next to the item "BRIGHTNESS [DARK]. Five seconds later, the screen shuts off and the sound alone is heard. Once in this mode, no picture but the OSD appears. But the channels and sound volume can still be changed.
- To Quit this mode, press the BRIGHT key on the remote control again and select any item other than BRIGHTNESS [OFF].
- Reset. You can cancel all Public Mode settings. (It returns to the factory setting.)
- Enter. You make sure after you have specified all functions, then press the enter key. Unless otherwise you press the enter key, all positions that you have selected will not be set.
FACTORY SETTING
Using the adjustment remote
controller, make the factory setting. (The MCL data setting must be made before
this.
- Keep down the factory setting key on the adjustment remote controller, and "H" appears for the factory setting 1 at the top left of the screen or "M" for the factory setting
- A few seconds later, "SETTING COMPLETE" appears at the center of the screen.
FACTORY SETTING CONTENTS
Model
|
Key name
|
Remote control code
|
Setting S-System
|
Osd language
|
Booster
|
LC-22GA3H
|
FACTORY
SETTING 1 (H)
|
100000111111110
|
I
|
CHINESE
|
ON
|
LC-22GA3M
|
FACTORY
SETTING 2 (M)
|
100000001010110
|
B/G
|
ENGLISH
|
ON
|
(NSEC
MODELS)
|
FACTORY
SETTING 3 (N)
|
100001101011110
|
D/K
|
CHINESE
|
ON
|
LC-22GA3X
|
FACTORY
SETTING 4 (X)
|
100001001011110
|
B/G
|
ENGLISH
|
OFF
|
At the factory setting 2 (M) and
factory setting 4 (X), the frequencies of the following 5 channels alone will match
those of Australian channels.
TV-CH
|
Fv
[MHz]
|
2
|
64.25
|
7
|
182.25
|
9
|
196.25
|
10
|
209.25
|
28
|
527.25
|
