Sunday, December 23, 2012

HYUNDAI HLT-3220 _ SERVICE MODE _ TFT-LCD TV




TO ENTER SERVICE MODE


When the EEPROM has been replaced, the SVC data should be restored as the function of individual system and specification.
Note: into the SVC mode, Initialize with default data.
  • Press 5 Seconds MENU buttons on both TV set and Remote Controller at the same time to get into SVC mode.
  • Press the Yellow button several times to find SVC Data.
  • Input the corresponding SVC data referring to Table below with the Volume Up/down key.
  • Press the OK button to memorize the data.
  • Press TV/AV button to exit SVC mode.