TO ENTER SERVICE MODE
- Press "Volume DN" key on the unit until the volume decreases to minimum level.
- Press "Display" key on the remote handset [don't release the volume key]
- Press '1' to enter white balance adjustment menu.
- Press '2' to enter picture geometry alignment for PAL.
- Press '3' to enter picture geometry alignment for NTSC
- Press '4' to enter sharpness setting menu.
- Press '5' to enter sound alignment.
- Press '6' to enter AGC and volume setting.
- Press '7' to enter system setting.
- Press '8' to enter picture alignment menu -1.
- Press '9' to enter picture alignment menu - 2.
- Enter 'D'mode, by pressing 'D' mode On/Off key.
- Press key "0", then choose OSD item and adjust OSD horizontal position.
- Press key "2" then choose OSDV50 item and adjust OSD horizontal position.
- Press key "3" then choose OSDV60 item and adjust OSD horizontal position.
FLOWCHART OF ALIGNMENT [Click on picture to Enlarge}