ENTERING OSD MENU {SERVICE MODE}
- Turn the TV on.
- Press the Menu button, and select User OSD Menu.
- Select Audio, Settings, and then Balance.
- Use the numeric keypad on the remote control to enter 9-1-8-OK in sequence. The Factory OSD should be displayed.
- NOTE: If necessary, re-enter the number keys, and then press OK on the remote control.
TO EXIT OSD MENU {SERVICE MODE}
- To exit from the Factory OSD menu, use the numeric keypad on the remote control, and enter 9-1-8-9.
- NOTE: If the character “M” appears on the screen, press the Menu button first.
SERVICE MODE KEYS
Remote control
|
Bezel button
|
Functions
|
Up arrow, down arrow
|
CH +/–
|
Select item by moving cursor
up and down
|
Right arrow
|
VOL +
|
Enter lower-level menu
|
Menu
|
Menu
|
Enter/exit the Factory OSD
menu
|
Right/left arrows
|
VOL +/–
|
Decrease or increase the
adjustment values
|
Back
|
—
|
Return to upper-level menu
|
LED INDICATORS
Indicator
|
Flick frequency [times/second]
|
Failure parts
|
Location
|
Flickers Red
|
10
|
Tuner [A101]
|
Tuner and audio board.
|
1
|
SVP-EX62(U9)
|
Main board
|
|
Flickers Blue
|
10
|
MSP4450G(NP01)
|
Tuner and audio board.
|
1
|
Panel
|
PDP Panel Module.
|
VIDEO SETTING
- Each source has a separate video setting. The sources are: Video, DTV, VGA, YPbPr, and HDMI. Each can be adjusted in factory OSD Menu. These items cannot be adjusted UNLESS the TV is turned to corresponding source first. Otherwise you may introduce mistakes to software. In case this mistake happens, Software Updating is needed. Other Video Settings marked in purple in following table have fixed data reset in factory. These settings are not changeable.
NOTE: Max means the 100 level, Mid means the 50 level, and Min means the 0 level and each
level corresponds to the user menu item. STD means the standard level, Movie means the Movie level, and Vivid means the Vivid level of setting
source.
