X/BD
- Receiving LOGIC signal from CONTROL B/D and make ADDRESS PULSE(generates Address discharge)by ON/OFF operation, and supplies this waveform to COF(data).
COF SEPARATING
- Lift up lock as shown in arrow.
- Pull COF as shown in arrow
Z SUSTAIN B/D
- Make SUSTAIN PULSE and ERASE PULSE that generates SUSTAIN discharge in panel by receiving LOGIC signal from CONTROL B/D.
- This waveform is supplied to panel through FPC(Z). *composed with IPM,FET,DIODE, electrolytic capacitor ,E/R coil.
FPC SEPARATING
- Separate the fixed Screw of Z-Board. Pull out Lock as shown in arrow.
- Condition in Lock part is pulled.
- Pull FPC Connector as shown in arrow.
IPM stands for (Intelligent Power Module)
E/R stands for(Energy recovery)
Z-SUSTAIN BOARD
CONTD:
