SAMSUNG LN26C350D1D LN32C350D1D SERVICE MODE

TO ENTER SERVICE MODE

• Turn the Power Off the set to Stand-by.
• Press {Mute => 1 => 8 => 2 => Power On} to turn the set On.
• The set turns On and enters Service mode. This may take approximately 20 seconds.
• Press the "Power" button to 'Exit' and store data in memory.
• Initial Service Mode Display state.
• To 'EXIT' factory mode, Turn the Power Off LCD TV set by remote control or power cord.

=============================================

OPTION

ADC/WB

Control

Advanced

T-SAT4AUSHC - XXXX

DTP-LP--App-XXXX-XX

ADC - HDMI X COMP  X PC X AV X

EDID : SUCCESS

HDCP : SUCCESS

Build Date: XX-XX-XXXX

Date of Purchase : xx/xx/xxxx

==============================================

To enter hidden Factory Mode

• Enter into Factory Mode.
• Highlight 'Advanced'.
• Key input: 0 + 0 + 0 + 0
• Hidden Menu : Advanced.

BUTTONS OPERATIONS WITHIN SERVICE MODE

Menu	Full Menu Display / Move to Parent Menu
Direction keys UP | DN	Item selection by Moving the Cursor.
Direction keys > | <	Data increase/Decrease for the selected item.
Source	Cycles through the active input source that are connected to the unit.

EDID REWRITE METHOD

1. Into Factory Mode.
2. Enter Factory Menu 'Control \ EDID'.
3. Change 'EDID ON/OFF => ON, by direction key ' > '.
4. Change 'EDID WRITE ALL => success' by Direction key ' > ' again.
5. Change 'EDID ON/OFF:  On => OFF, by Direction key '>'.

Sub Option	Factory name	Data	Range
	Panel display time	Xhr
	Dimm type	EXT	INT/EXT/INT_NEG/INT_POS/EXT_NEG
	Watchdog	On	On / off
	LVDS Format	JEIDA	JEIDA \ VESA