RCA RCR N04GR - UNIVERSAL REMOTE CONTROL - SETUP PROCEEDINGS

SETUP PROCEEDINGS

• The Auto Code Search goes automatically through all the codes for the device you're trying to control. It’s the easiest method, but it can sometimes take longer than some of the other programming methods.
• The Brand Code Search searches through the codes for select brands of devices. It’s not as easy as the auto code search, but it can be faster.
• The Direct Code Entry lets you enter a code from the accompanying code list for your brand of device. It’s not as easy as the other methods, but it’s potentially the fastest method.
• The Manual Code Search lets you manually go through all the codes for the device you're trying to control.

Auto Code Search

The Auto Code Search goes automatically through all the codes for the device you're trying to control. When you find the one that operates your device, you can stop the search and store that code.  Each device key is associated with a type of device—the TV is preset to search for TVs, SAT•CBL•DTC for satellite receivers, cable boxes or digital TV converters, DVD•VCR for DVD players, and DVR•AUX for DVRs. To program a device key for a different type of device, see the Changing a Key’s Device Type section.

To exit without saving a new code at any point in the Auto Code Search, press the EXIT key.

• Manually turn on the device you want to control.
• Press and hold the device key you want to program. The POWER key illuminates. While you're holding down the device key, use your other hand to press and hold the remote’s POWER key at the same time. The POWER key turns off.
• Wait until the POWER key comes on and stays on. Then release both keys.
• Point the remote directly at the front panel of the device you want to control. Press PLAY on the remote and wait 5 seconds. The remote is testing a batch of 10 codes on your device.
• Did your device turn off?
• IF YES: Go to step 5.
• NO?  Press PLAY again. The remote tests the next batch of 10 codes. Keep pressing PLAY every 5 seconds until your device turns off.
• When your device turns off, press the REVERSE key on the remote and wait at least 2 seconds. The remote tries the last of the previous ten codes.
• Did your device turn on?
• YES: Press the STOP key. You're done! You've programmed this device key.
• NO?  Press REVERSE again. The remote tests the next code in the batch. Keep pressing REVERSE every 2 seconds until your device turns back on. When it does, press STOP.
• If you accidentally press the REVERSE key after your device turns on, press the FORWARD key. Then, wait two seconds to see if your device turns off again.

Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the device you are currently programming the remote to control. Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. If some features don't work, try a different code. See the “Testing the Code for Maximum Functionality” section below for more information. During the Auto Code Search, the remote ignores key-presses that aren't part of the search. The search times out after two minutes (the POWER key blinks four times and turns off, and the last programmed code under that device key is retained). The POWER key blinks four times and turns off when the remote has gone through all the codes. The remote exits the Auto Code Search. If your device hasn't turned off yet, try a different search method.

TESTING A CODE FOR MAXIMUM FUNCTIONALITY

• Try a variety of the device’s functions with the remote. If some device features don't work, go to the next step to try a different code.
• Repeat the Auto Code Search Method from the beginning. When your device turns off, do not stop searching. Instead, with the unit now off, continue to press the PLAY key every 5 seconds until the unit turns back on.
• Once the unit turns back on, press the REVERSE key on the remote every 2 seconds until your device turns off again. When your device turns off again, press the STOP key.
• Test the key’s functionality again by attempting to control a variety of the device’s functions. If the code that has been stored controls the majority of the device’s functions, programming is complete. If the code stored does not give maximum functionality, try another code.

CODE SEARCH METHOD

The Brand Code Search goes through only the codes for one of the select brands listed in the accompanying code list. If your brand of device is listed, this search can be very quick and easy.Each device key is associated with a type of device— the TV is preset to search for TVs, SAT•CBL•DTC for satellite receivers, cable boxes or digital TV converters, DVD•VCR for DVD players, and DVR•AUX for DVRs.

To program a device key for a different type of device, see the Changing a Key’s Device Type section.

To exit without saving a new code at any point in the Brand Code Search, press the EXIT key.

• Manually turn on the device you want to control.
• Find your device’s brand in the Brand Code list section of the accompanying code list. Circle the number for your brand and keep the list handy
• Press and hold the device key you want to program. The POWER key illuminates. While you're holding down the device key, use your other hand to press and hold the remote’s POWER key at the same time. The POWER key turns off.
• Wait until the POWER key comes on and stays on. Then release both keys.
• Look at the numbers you circled for your device’s brand code number. Press those numbers on the remote keypad. {For single-digit brand codes, press the 0 key first (for example, 0-5 for 5).}
• Point the remote directly at the front panel of the device you want to control. Press POWER on the remote and wait 2 seconds. The remote is testing a single code for your device’s brand.

Did your device turn off?
YES: Press the STOP key to store the code. You're done! You've programmed this device key.
NO?  Press POWER again. The remote tests the next code for your brand. Keep pressing POWER every 2 seconds until your device turns off. When it does, press STOP.

DIRECT CODE ENTRY METHOD

Direct Code Entry lets you enter a code from the accompanying code list for your brand of device. It’s not as easy as the other methods, but it’s potentially the fastest method. Each device key is associated with a type of device,  the TV is preset to search for TVs, SAT•CBL•DTC for satellite receivers, cable boxes or digital TV converters, DVD•VCR for DVD players, and DVR•AUX for DVRs. To program a device key for a different type of device, see the Changing a Key’s Device Type section.

• Manually turn on the device you want to control.
• Find the Code List that came with the remote. Locate the section for the type of device you're trying to program, and find your brand in that section. Circle the codes for your brand and keep them handy.
• Press and hold the device key you want to program (the POWER key illuminates). While you're holding down the device key, use your other hand enter the first five-digit code for your brand in the code list (the POWER key turns off after the first digit).
• When you've finished entering the five-digit code, keep holding down the device key and look at the POWER key.
• Is the POWER key illuminated?
• YES: You're done. You've programmed this device key.

NO, it blinked four times and turned off: 
You have either entered a code number that is not in the code lists or missed a step in the code entry procedure. Try step 3 again.  
Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. 
If some features don't work, try a different code in the list. Remember to enter the code for future reference in the box provided in the Code Retrieval section of this manual. 
If your brand isn't listed in the code list, use one of the Code Search methods to program the remote control. (Refer to the Auto and Manual Code Search methods.) 
If you release the device key any time during the Direct Code Entry procedure, the POWER key blinks four times, and the process is exited. The last programmed code under the device key is retained.

MANUAL CODE SEARCH METHOD

The Manual Code Search lets you go one-by-one through all the codes for the device you're trying to control. When you find the one that operates your device, you can stop the search and store that code.  The Manual Code Search method may take a long time because the remote searches through all of the codes in its memory one-by-one. If your brand is listed in the Brand Codes or the Code Lists, first try the Brand Code Search or the Direct Code Entry method. Each device key is associated with a type of device—the TV is preset to search for TVs, SAT•CBL•DTC for satellite receivers, cable boxes or digital TV converters, DVD•VCR for DVD players, and DVR•AUX for DVRs. To program a device key for a different type of device, see the Changing a Key’s Device Type section.

To exit without saving a new code at any point in the Manual Code Search, press the EXIT key.

• Manually turn on the device you want to control.
• Press and hold the device key you want to program. The POWER key illuminates While you're holding down the device key, use your other hand to press and hold the remote’s POWER key at the same time. The POWER key turns off.
• Wait until the remote’s POWER key comes on and stays on. Then release both keys.
• Point the remote directly at the front panel of the device you want to control. Press POWER on the remote and wait 2 seconds. The remote is testing a single code for your device.
• Did your device turn off?
• YES: Press the STOP key to store the code. You're done! You've programmed this device key.
• NO?  Press POWER again. The remote tests the next code for your device. Keep pressing POWER every 2 seconds until your device turns off. When it does, press STOP. {Because there are so many codes, you may have to press the POWER key many times—possibly hundreds of times.}
• To exit without saving a new code at any point in the Manual Code Search, press the EXIT key.

Throughout the programming of each key, keep the remote pointed at the IR sensor of the device you are programming the remote to control. Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. If some features don't work, try a different code. See the “Testing the Code for Maximum Functionality” section below for more information. During the Manual Code Search, the remote ignores key-presses that aren't part of the search. The search times out after two minutes (the POWER key blinks four times and turns off, and the last programmed code under that device key is retained). The POWER key blinks four times and turns off when the remote has gone through all the codes. The remote exits the Brand Code Search. If your device hasn't turned off yet, try a different search method.
                                                                                                      >> For More >>