SYSTEM RESET
- Press key "OPTIONS" on the remote control, the TV show the setup menu
- Select the menu using the [DN / RIGHT] on the remote control and
- Access the main preferred to make the system reset.
TO CHANGE THE REGION CODE
Press
"9" "9" "9" "9" on the remote and enter
the number want to change the region code:
1
USA
2
U.S.
3
AP
4
Australia, NZ, Latam
5
Russia, INDIA
6 CHINA
TO CHANGE VERSION CONTROL
- Press "1" "5" "9" no remote control.
- Press the "ok" to confirm.
- The TV will show the following message:
================================
Current
model HTS3365/55
Version:
00.12.01_1 Release: 2007.12.19
region
: 4 Servo: 5B.61.00.00
8032:
05.00.04.06 RISC:00.00.02.00
MCU: V04.08
================================
IF
current model does not match you set use down arrow key on the remote to change
OK
TO CHANGE PASSWORD
- Press the "OPTIONS" on the remote control, the TV show the setup menu
- Select the menu using [DN / RIGHT] on the remote control and
- Go to the selected page "password" to change {* 000000 is the default password provided.}
TO CHANGE TUNER GRID (applied
only to certain regions)
In
some countries between adjacent channels in the frequency band (AM / MW) / FM
is 9kHz/50kHz (10kHz/100kHz in other areas).
- Press "source" to select "FM" or "AM"
- In "FM" or "AM", press and hold the "play / pause" until "Grid 9" or "Grid10"
SOFTWARE UPDATE
- CD-R Copy files "software"
- Open the CD door and insert the CD-R disc program
- Close the door
- show VFD ::
============================
“Loading“
“erase”
Writing”
for 1 minute
“done”
============================
The system automatically turns off.
OSD
display:
=======================================
Do
you wish to continue with the software upgrade?
OK Cancel
=======================================
Select
"OK", OSD display
======================================
upgrade
in process...
V336X
please do not unplug or switch off the device.
======================================
