DATA PACKAGE
- Product Data Package contains all product specific data to make the Phoenix Service Software and tools usable with a certain phone model.
- Check that the dongle is attached to the parallel port of your computer.
- Install Phoenix Service SW.
- Download the installation package (e.g. RH-12_dp_v_40.0_mcusw02.19.exe) to your computer (e.g. C:\TEMP).
- Close all other programs.
- Run the application file (e.g. RH-12_dp_v_40.0_mcusw02.19.exe) and follow instructions on the screen.
Note that very often the Phoenix
Service SW and the Phone Specific Data Package for Phoenix come in pairs,
meaning that certain version of Phoenix can only be used with certain version
of Data Package. Always use the latest available versions of both. Instructions
can be found in phone model specific Technical Bulletins and readme.txt files
of the data packages.
INSTALLING PHOENIX DATA PACKAGE; PRODUCT SPECIFIC
- Run the RH-12_dp_v_40.0_mcusw02.19.exe to start the installation.
- When you choose “Next” the files needed for the installation will be extracted. Please wait.
- Choose “Next” to continue.
- From this view, you can see the contents of the Data Package. Read the text carefully. There should be information about the Phoenix Version needed with this data package. Choose “Next”.
- Confirm location and choose “Next” to continue. Install shield checks where the Phoenix application is installed and the directory is shown. Choose “Next” to continue.
- Choose “Next” to start copying the files.
- Phone model specific files will be installed. Please wait.
- Choose “Finish” to complete the installation.
Now Phoenix can be used to for
example flash phones and print type labels after:
- configuring users
- managing connections
FLS-4S can be used right away
FPS-8* can be used after updating
Flash Update Package files to it.
