OPTION SETTINGS [After replacing the Memory IC (IC803)]
The memory IC, IC803, stores the option data of TV set and service adjustments data for each circuit, therefore, when the memory IC is replaced, it should be performed following setting and “SERVICE ADJUSTMENT”.
To
enter to the Option Mode
- Press and hold the F/OK button on the remote control and P [DN] button on the front panel of the TV.
- The option window will appear on the screen.
OPTION MODE FOR CE30LC3-C-00
/ CE30LC3BK-C-00
===============================
ON-TIMER
OFF
PLUG
AND PLAY ON
WELCOME
TEXT ON
BBE
OFF
AUTO
VOLUME OFF
HEADPHONE
OFF
CRT
16:9 MODE ON
NOISE
REDUCTION ON
COUNTRY
EU
RASTER
ROTATION OFF
SESA
OFF
DIGITAL
RC ON
LIGHT
MONITORING ON
VIDEO
MUTE OFF
================================
To
set the option mode
- Highlight the desired option item by using the P [UP] or P [DN] button .
- To switch the option mode, use the Volume - (LEFT) or Volume + (RIGHT) button.
- The data which is set in the option mode is stored into the memory IC automatically.
- To Exit from the Service Mode: Press the MENU button.
Default setting to
option mode.
Option
Mode
|
Mode
|
Description
& Note
|
ON-TIMER
|
ON or OFF
|
On-timer available,
default “ON”
|
PLUG AND PLAY
|
ON or OFF
|
Plug and Play mode,
default “ON”
|
WELCOME TEXT
|
ON or OFF
|
Display message when first
set up, default “ON”
|
BBE
|
ON or OFF
|
BBE sound mode, default
“OFF”
|
AUTO VOLUME
|
OFF or ON
|
Default “OFF”
|
HEADPHONE
|
ON or OFF
|
Headphone control ,
default “OFF”
|
CRT 16:9 MODE
|
ON or OFF
|
Default “ON”
|
NOISE REDUCTION
|
ON or OFF
|
Default “OFF”
|
COUNTRY
|
UK, IRE BG/DK / I / LL’
|
TV system, default “BG/DK
/ I / LL”
|
RASTER ROTATION
|
ON or OFF
|
Default “OFF”
|
SESA
|
ON or OFF
|
Default “OFF”
|
DIGITAL RC
|
ON or OFF
|
Digital option, default
“ON”
|
LIGHT MONITORING
|
ON or OFF
|
Ambient light control of
LCD brightness, default “ON”
|
INITIALIZATION OF MEMORY IC
- To initialize the memory IC (IC803), press and hold the NORMAL [ à . ß ] button on the remote control, then press the P [DN] button on the front panel of the TV set and then turn the Mains switch Off and On.
- The initialization is now completed.
- When initialized the memory IC and all of the setting data (option data and service adjustment data) stored in the IC are reset to the default value. It is necessary to set the option settings and readjust the service adjustments listed here below and to re-tune all the channels.
- TDA9885 : This can be adjusted for AGC.
- Video : This can be adjusted for the service adjustment.
[After
replacing the Memory IC (IC803)]
- The memory IC, IC803, stores the service adjustments data for each circuit, therefore, when the memory IC is replaced, it should be programmed by using “OPTION SETTING” described above.
TO
ENTER SERVICE ADJUSTMENTS
- While pressing the green button on the remote control press the P [DN] on the cabinet front.
- The service menu appears.
========================
Service
SV
Vers 042
Video
Sound
STV2310
TDA9885
STV8206
Median
Filter ON
Other
Colour
Temperature
WSS
LCD
Parameters
Fan control
=======================
- Use the [UP] or [DN] to highlight the service menu you require and press the F/OK button to enter.
- Press the Menu button to navigate ackwards through the service menus until menus disappear.
- Do not attempt to adjust service adjustments not listed on the above otherwise it may cause loss of performance and product safety.
Service
menu: Video
- Enter the service adjustment menu as described on the previous page and select “Video” using the P[UP]or P[DN] buttons and then press the F/OK button to enter.
- Use the P[DN] or P[UP] buttons to select the option, then press the F/OK button on the remote control to enter.
============================
VIDEO
G2 Alignment Config.
White Point R 41
White Point G 32
White Point B 36
Peak White Limiter 0
Black Level offset R 8
Black Level offset G 8
Gain pre-scale RGB 0
Fast blanking delay 0
Luma/Chroma delay 0
Restore default.
============================
Service
menu: Sound
- Enter the service adjustment menu as described on the previous page and select “Sound” using the P[UP] or P[DN] buttons and then press the F/OK button to enter.
- Use the P[UP] or P[DN] buttons to select the option, then press the F/OK button on the remote control to enter.
===========================
Audio
Menu
Audio
Type 3
Volume 0
Balance 6
Loudness 13
Spatial
effect 0
===========================
Service
menu: TDA9885
- Enter the service adjustment menu as described on the previous page and select “TDA9885” using the P[UP]or P[DN] buttons and then press the F/OK button to enter.
- Use the P[UP] or P[DN] buttons to select the option, then press the F/OK button on the remote control to enter.
===========================
TDA9885
Write 1 70
===========================
Do not attempt to adjust the
following service adjustments except when adjustments are required in servicing
otherwise it may cause loss of performance and product safety.
AGC
ADJUSTMENT
- Select the clearest VHF station
- Connect a digital voltmeter to test point TP-A and GND
- Enter service menu : TDA9885
- With the P[UP] or P[DN] buttons select “Write 1”
- Adjust using the [VOL +] or [VOL - ] buttons until the readout from the voltmeter is 3.2 Vdc.
GREY
SCALE ADJUSTMENT: SCREEN ADJUSTMENT
- Make sure the set is warm (20 mins)
- Receive Black and White picture/pattern
- Enter service menu “Video”
- Select item “White Point R” or “White Point B”
- Using the [VOL +] or [VOL - ] buttons adjust to make the white, white.
HORIZONTAL
ADJUSTMENT: HORIZONTAL CENTRING ADJUSTMENT
- Set wide screen mode to “FULL”.
- Preferably receive a circular pattern
- Enter service menu “LCD Parameters”
- Use the PPDN] or P[UP] buttons to highlight “H Display start”.
- Press the [VOL +] or [VOL - ] buttons to adjust horizontal center.
VERTICAL
ADJUSTMENT: VERTICAL CENTRING
ADJUSTMENT
- Set wide screen mode to “FULL”.
- Preferably receive a circular pattern
- Enter service menu “LCD Parameters”
- Use the P[DN] or P[UP] buttons to highlight “V Display start”
- Press the [VOL + ] or [VOL - ] buttons to adjust the vertical center.
