SERVICE MODE
- Use the numeric keys on the remote control to set the receiving channel to Program [91].
- Set Sharpness on the Picture Menu screen to [0].
- Press the buttons on remote control in the order: { Skip (R) à Move (G) à Menu. }
- To terminate the menu screen, press the MENU button on the remote control, or the power button on the TV or remote control.
WHITE BALANCE ADJUSTMENT
- Set the TV to the "Normal I" mode when performing adjustment.
- Supply a stairstep signal from the pattern generator.
- Use the "Vol +/-" buttons on the remote control to adjust the Black R and Black G values on the menu screen so that the color of scales A is gray.
Drive Adjustment
- Supply white raster from the pattern generator.
- Use the Vol +/- buttons on the remote control to set the WP Red value to 63 so that the picture is reddish.
- Lower the value until red disappears.
- Use the Vol +/- buttons on the remote control to set the WP Green value to 63 so that the picture is greenish.
- Lower the value until green disappears.
- Use the Vol +/- buttons on the remote control to set the WP Blue value to 63 so that the picture is bluish.
- Lower the value until blue disappears.
- Perform these steps several times so that the picture is seen more white.
