AIWA - VX1470PH SERVICE MODE

TO ENTER SERVICE MODE

• If a service repair is undertaken where it has been required to change the Memory IC, initial data set should be done.
• Initial data setting is not possible if clock has been set.  To reset clock, either unplug AC cord from main power wall socket and allow at least 30 minutes before Power On or discharge the backup capacitor

1. Enter Data Set Mode by setting volume to minimum[0]. 
2. While holding down the Volume Button on the front panel of the TV, press key [6] on the remote control handset simultaneously.  
3. Address and data will appear.
4. Address now selected will blink.
5. Use the [Set +/-] keys on the remote to step through the address until reviewed address to be changed is reached.
6. Press "Enter' to select the data.  When data is selected, it will blink.
7. Again, step through the data using [Set +/-] until required data value has been reacted.
8. Repeat steps 4 to 7 until all data has been checked.
9. When satisfied. Power Off the TV to finish data input.