ENTER SERVICE MODE
- Press " menu" button on the remote control.
- Press "Recall" button thrice to enter factory menu.
- Press [P + or P-] buttons to select an item to adjust.
- Press [V + or V-] buttons to adjust the data value to selected item.
- Press "Recall" button again to "Exit" factory menu.
DEFAULT DATA VALUES
- H-Phase => 11.
- OSD - H Position => 25
- V-Size => 82
- V-Position => 1
- V-Lenearity => 22.
- V-S correction => 4
- V-Kill => 0
- Sub - Bright => 50
- Rf-Agc Auto => 25
