Sunday, July 15, 2012

HAIER - RGBTV-25F99 PAL,SECAM,NTSC SERVICE MODE



ENTER SERVICE MODE

  • Press [P.STD=>S.STD=>CALL=>POWER]  buttons on the remove control in sequence to enter the service menu.
  • Press {P+ /CH+} buttons to call an item to adjust.
  • Press {Vol+ / Vol-} buttons to change the data value to selected item.
  • Press, 1 to 6 buttons for quick selection of Menus 1 to 6.
  • Press '9' button to select OSD sync signal cathode.
  • Press AV / TV button to switch from AV to TV.
  • Press 'Mute' button to select or deselect mute.
  • Press Power button to switch OFF.
  • Press other buttons to activate the maintenance menu.
  • If '2' (Geometry) is selected, a half image or full image can be displayed in rotation, if button '8' is pressed.
  • If picture is selected, a horizontal line can be displayed and removed it if button '0' is pressed.