TO ENTER SERVICE MODE
- Disconnect AC
- Push front panel keys [Open/Close + Play + Stop]; and AC in.
- Release the Keys after the front panel display shows "SERVICE'.
- The service mode screen will be displayed on the TV screen.
Option-2:
- Connect the set to AC, and wait till initialization cycle completes. [FLD will show ['Wait.. Wait..' for about 10 seconds.
- Use the remote control, key in the following code in sequence.
- [DISPLAY => 0 => 2 => 1 => SUBTITLE].
- While sending the code, wait time between each key code could not send later than 3 seconds.
- If 3 seconds waiting is exceeded, have to re-key in the code.
- If code entry is successful, set will auto boot and FLD will display SERVICE. The service mode will be displayed on the TV screen.
DIAG:
- The unit test of the device mounted on the Main Board.
- The unit test of the device mounted on the Wireless Board. [Only for wireless model]
DISPLAY ERROR LOG:
- Error Log is displayed.
- The displayed logs can be saved in the USB memory.
FACTORY INITIALIZE
- Return all of the player settings to their factory defaults.
NETWORK
- Confirm Wired Network Connection.
VERSION UP
- The set updates by update disc.
SYSTEM INFORMATION
- System information of the set is displayed.
- The information on a soft version and drive information etc: displayed.
EMC TEST MODE
- Not used.
DRIVE
- Write Drive OP data and check drive.
