TO ENTER SERVICE MODE
All system geometry and white balance alignments are performed in production service mode. Before starting the production mode alignments, make sure that all manual adjustments are done correctly.
To enter Service Mode:
- Enter the Menu by pressing "M" button, and then press digits (4=>7=>2=>5).
- Service mode screen will appear.
There are three sub menu in the service menu. These are Display, Calibration and Deinterlacer menus.
Press right / Left buttons on the remote cotnrol to select a menu Title, and use Up / Dn buttons to select a Menu Item, and press Right / Left button or OK buttons to set the menu item to the desired option.
To Exit from service menu option, press "M" button.