Thursday, July 12, 2012

KENWOOD - KDC-8021 - KDC-M9021 - KDC-X859 - TEST MODE



TEST MODE

To enter Test Mode.
  • While holding [1/5] key and the [3/7] key, reset the unit.
  • To exit from test mode, Hold down the [4/8] key, reset the unit.
  • Test Mode Reset Status

  1. Sources are all Off.
  2. All display segments lit up.
  3. Volume at [-10db], shows 30 on display.
  4. Loud is Off.
  5. CRSC is Off.  System Q is in Flat.
  6. BEEP sounds at momentary pressing at any time
  • Special displays in tuner.
  • When the following display appear in tuner mode, it shows a problem with the fond end.
  1. "TNEP2 NG":  F/E is not aligned and EEPROM is in reset such as when skipped.
  2. "TNCON NG":  Cannot communicate with F/E (fond end).
  • K31 switching.  Each time the Preset '6' key is pressed in Tuner Mode, switches one at a time through the following sequence. [AUTO=>FORCED WIDE=>FORCED MIDDLE=>FORCED NARROW=>AUTO].
  • When reset, displays the following in AUTO.
  1. AUTO  = FMA
  2. FORCED WIDE  = FMW
  3. FORCED MIDDLE  =  FMM
  4. FORCED NARROW  = FMN
CD receiver test mode specifications.
  • No automatic ejection during reset-start.  does not make a CD check in reset with a CD is loaded. 
  • Using the Track Up key jumps to the following tracks.  NO. 9=> NO.15=>NO. 10=>NO. 12=> NO. 14=> and back to NO. 9.
  • Using the Track Down key moves 1 track downwards from the track being played.  
  • When total number of MP3 or WMA disc tracks is '9' or less, playback start from the first track.  
  • With model equipped with the MP3 or Mp3/WMP mechanism, the mechanism model name and version number are displayed at the bottom line.
Audio Items.
  • Momentarily pressing the 'Q' key calls up Audio Adjustment mode.
  • Pressing the [*] key on the remote control calls up Audio Alignment mode.
  • An initial item is set to Feder.
  • Continuous forward is disabled on the remote control.
  • Bass/Middle/Treble/NF are settable in '3' steps of [MIN/CENTER/MAX] with track Up or Dn keys.
  • Balance is settable in '3' steps of Left Max/Center/Right max, with Track Up/Dn keys.
  • Fader is settable in '3' steps of Rear Max/Center/Front Max with Track Up/Dn keys.
  • HPF is settable in '2' steps of THRU/220Hz with Track Up/dn keys.
  • LPF is settable in '2' steps of THRU/120Hz with Track Up/Dn keys.
  • Bass f/ Bass Q/ Bass EXT/Middle f / middle Q.
  • Treble f, do not appear in the audio alignment.
Menu Items
  • The DNPP/SBF keys on the remote control calls up Menu Mode.
  • Continuous forward is disabled on the remote control.
Backup Current Measurement
  • The Mute Terminal turns Off '2' seconds after being reset in ACC Off.  The panel and CD mechanisms are disabled during this time.
Channel Space Switching [K/M mode]:  While holding the [1/5] key and the [4/8] key, reset the unit.

Others
  • Automatic panel close is disabled when CD is inserted.
  • Panel operation is disabled at Power-On or Power-Off.
  • Panel open and closes with press long the 'Q' key.
  • No displays such as "CODE OFF"during Power-On.
  • Pressing the 'T1' [Auto] key during changer operation turns in 2Zone.  Cancel by pressing 'T1'[Auto] key again.
  • Pressing the [4/8] key for '1' second or more during all Off, calls up the Mask Key [security] write mode.