TO ENTER SERVICE MODE
- Simultaneously press [Volume -ve] button on the front panel of the TV and [Status] (+) button on the remote control.
- To 'Exit' service mode, switch Off the TV by its main Power On | Off switch.
Service mode option is also used to automatically check the bus lines and hexadecimal code of the TV set. If the CCU ports have been checked and found to be incorrect, or not located; then "-----" will appear in place of "OK". For more in depth TV diagnostics use the LUSI interface as below.
- LUCI interface kit [Linked Utility Computer Interface]. This contains interface and cables connecting TV service connector and a PC as well as diagnostic software. As new models are introduced upgrade software become available. Part number is [TZS6EZ002].
- VICI [Visual Interactive Computer Information]. These CDs contain multimedia documentation providing quick access to service information. Part number is [TZS7EZ006 & TZS7EZ005] {Contains, Service Manual, Instruction books & Technical Information.
- TASMIN [Technically Advanced System for Multimedia Interactive Notes]. As well as providing a first step towards more interactive training this also achieves quick access to technical information.
SERVICE MENU WINDOW
VPC => OK.
TUN => OK.
E2 => OK.
DPL => ---.
CIP 1 => OK.
CIP 2 => OK.
VP => OK.
DFU => OK.
COL => OK.
PIP => OK.
OPTION 1 => 80.
OPTION 2 => B1.
OPTION 3 => 42.
OPTION 4 => 20.
OPTION 5 => B1.
OPTION 6 => E9.
PCB => OK.
CAB => 0K.
SUM = Factory use only.
