D-MODE
- To enter D-Mode [Design-Mode] while pressing d-Mode On/Off key.
SERVICE MODE
- To enter service mode, press Volume Down key, on the UNIT until the level of volume decreases to minimum level [0].
- While pressing the Volume Dn key, press 'DISPLAY' key on the remote control to enter service mode.
- After enter D-Mode / S-Mode press 'OK'
- Press Up/Dn, to select Menu [1 to 22], press OK to enter the menu and press Prog Up / Prog Dn to adjust the data value. Press D-Mode again to EXIT from factory menu.
- It is possible to enter Menu-1 to Menu-19 directly by pressing digits buttons on the remote control 1to 9,0,notebook,CAP,display,sleep, calender,system/INS, favorite, return, picture
- There is difference between PAL geometry / OSD adjustments and NTSC / OSD adjustments. Do the PAL adjustments first before doing NTSC adjustment.