SERVICE MODE [1] =>
- Enter digits [9=>3=>0=>1] in sequence by the remote control to enter the service mode. Service menu has '3' sub-menus.
- Adjustment.
- Selection.
- Option.
Navigation through these menus can be done by pressing "OK" button. Every adjustment made to this menu will save automatically.
FACTORY MODE: There are two values for this adjusment. "OFF" & "ON". When "OFF" is set, the unit goes to standby at start up else the unit operates directly.
I2S PRESCALE : This adjusts the level of volume received via HDMI.
SCART PRESCALE: This adjusts the level of analogue stereo sound at MSP Scart Audio inputs.
NICAM PRESCALE: This adjusts the level of NICAM stereo sound at MSP IF Audio Inputs.
FM | AM PRESCALE: This adjusts the level of FM|AM stereo sound at MSP IF audio inputs.
AGC: Adjusts the Automatic Gain Control value.
WHITE-R | WHITE-G | WHITE-B | PIP WHITE-R | PIP WHITE-G | PIP WHITE-B: These are used for color bias adjustment. [Unlike other items in the service menu, changes will take effect immediately.
FACORY RESET: Resets all values to Factory Settings.
BACKLIGHT: Selects the backlight illumination level of the panel.
TUNER TYPE: Selects the type of tuner, should be selected parellel to the tuner used in the unit.
TELETEXT: Selects the Teletext type.
TIMER MODE: If OFF Timer is selected, the user will be able to enter time of the day info for the TV to switch Off. If Sleep Timer is selected, the user can specify some time period, after which the TV will go to standby automatically.
MSP CLIP: There are '4' values to this.
Contd:
