SERVICE MODE ENTRY
- Turn Off the 'Sub Power' button on the set, or press power button on the remote control to set the TV to standby.
- Turn on the 'Sub Power' button for more than 5 seconds while keep pushing 'Input Select' and 'Recall' buttons located on the bottom of the TV set.
PREPARATION
- Indicates service adjustment modes.
- Select 'Ship.2', and press 'Recall' button for more than 3 seconds by remote control. The screen disappears and the EEPROM is initialized.
- A service mode screen appears after initialization end again.
- To call and item to adjust, use 'Up' or 'Dn' buttons on the remote control.
- To adjust the data value to selected item, use 'Left' or 'Right' buttons on the remote control.
- To memorize the entered data, press 'Enter' button.