TO ENTER SERVICE MODE
- Use the master set-up remote control to identify the TV's operational mode (either consumer or commercial). Place the master set-up remote control in 'set-up' mode by presetting the TV SET-UP key. [For commercial models, a master set up remote control is required in order to access Service Default Alignment Mode [SDAM].
- Press "Recall" key. Information similar to the following will appear.
- Use [Up | Dn] & [Right | Left] buttons to access adjust menu items, and to adjust the data values.
STATUS ITEM => STATUS DATA => MEANING
- L011TV-US4PV
- MODE => COMMERCIAL/CONSUMER => INFORMATION TITLE.
- CHANNEL => CHANNEL, INPUT => CURRENTLY TUNED CHANNEL/INPUT.
- DCM => OFF/ON => DATA COMM. MODULE ONLINE/OFFLINE.
- CODES => 209 222 1 33 => INTERNAL DATA FOR FACTORY/SERVICE USE.
- SIGNAL => TUNED/NOT TUNED => VALID SIGNAL PRESENT/ABSENT.
- OP HRS => 0031h => NUMBER OF HOURS SET HAS OPERATED.[hex]
- ERRORS => 00000 => INTERNAL DATA FOR FACTORY/SERVICE USE.
To change the televisions' mode, ensure the master set-up remote control is in set up mode, then press [0-2-4-9-9-5-MENU] keys in order, without permitting the display to time out while entering the key sequence.
If operational mode is changed, the TV must be turned OFF and then back ON to complete the mode change. When the TV is in consumer mode, do not set the master set up remote control to activate commercial mode features.
When the TV is in commercial mode, the Institutional Television Menu may be accessed by pressing the 'Menu" button. Though the specific items in the menu will vary , some other informations will be displayed.
