TO ENTER SERVICE MODE
- power ON the TV.
- Press 'Menu' button and call up 'User OSD Menu'.
- Select Audio => Balance.
- Enter {0=>5=>3=>2} in sequence. If necessary, re-do digits keys.
- Service Menu [Factory] OSD will appear.
- To 'Exit' from service mode, press "Menu" again.
SERVICE MODE OSD MENU
- AUTO COLOUR: For VGA and component video sources, WB value must be adjusted. All other signal sources, the 'auto-colour does not work. Before adjusting, prepare signal instruments such as 'DVD' or 'K-8256' first, and find the video picture with Gray and Color Bars. The change the desired value.
SOURCE =. TIMING => PATTERN => NOTE
- ADC VGA => 1024*768 => GRAY-3 COLOUR => FOR VGA SOURCE.
- ADC HDTV => 720P => GRAY 3- COLOUR => FOR COMPONENT VIDEO.
NOTES
- Press "M" button and enter factory OSD menu.
- Press "Menu' button an enter factory OSD menu.
- Select the item "Auto-colour".
- Press [Vol+] to auto colour.
- Close the OSD after 5 seconds.
- The Factory Menu Data varies according to different sources. In case, changing the factory data by error, choose to "Clean Protected" by which it can resume the Default Value.
- Select the item 'Clean All".
- Press [Vol+] button to clear the EEPROM data.
- Close the OSD after 5 seconds.
- Restart the TV.