AIKO - FP-PL 4281 SOFTWARE UPDATE - PLASMA TV

                                           TO UPDATE THE FIRMWARE

1. Remove AC power cord from the PDP for power Off.
2. Connect the serial cable with between PO-TV.  Connect the D-Sub Conn of cable of Main FW update being provided to PC .  Connect the 3.5mm Jack to PDP-TV.
3. Move the firmware folder in PC.
4. Run "Flashexpress_logo.exe" in your PC.
5. Select "Folder" which is put firmware in Flashexpress.
6. Select the port of the PC and speed of communication.  It can be adjustable per setting of PC.
7. Select installing "Inf file".  Select "WARE3_boot.inf" at this time.
8. Connect the Power Cord by pushing "Flash" button.  Connect the power cord of TV.  
9. Update will start, and will complete. 
10. After the update is completed,  disconnect the update cable. Power 'OFF' TV can be 'On' according to Options at this time.

After updating the firmware of the main board, the TV should be resetted.  

• Push the buttons in the following order after the TV is Power On.
• [MUTE => SLEEP => PIC.MODE => MENU => INFO(ENTER]

ON SCREEN DISPLAY WILL BE

_________________________________________________________________________________

1. Calibration
2. Option Table.
3. Color control.
4. Device Adjustment.
5. Heatrun.
6. Version
7. Reset.

_______________________________________________________________________________

• Do the "Reset" by choosing the "7. Reset".
• Select [7] and press "Enter" button to reset the TV to Factory Default.
• The firmware version can be checked by selecting [6] and press Enter button on the remote control.