TO ENTER SERVICE MODE
- To enter service mode to this set, using customer remote control:
- Enter [1=>9=>7=>2] by remote control, when Main Menu appears.
ITEM => SETTING => FUNCTION
- Brightness Mode => Auto => To adjust general brightness.
- RS232 setting => 19200 => Slip speed for Software Downloads.
- Customer Logo => X => To choose the customer logo, if available (1,2 etc)
- Operation Time => .... => Shows the operation time since first switch ON, can be resettled by technician.
- Default colour settings => ----- => To adjust general colour settings, normal value is: RGB offset 7 and RGB gain 128.
- Power On Input => Last => Defines which input is active after switching On the unit.
- Temperature settings => Shows temperature threshold for temperature alert function. Templ:60 degreeC; Temp2: 65 degreeC; Temp3: 63 degreeC; also shows all time max and Min temperature, which can be resetted by technician.
- Full Mask => Off => Available functions: Inverted; Red; Green; blue; Full White. Might help against Burn In.
- Sub Volume => ...... => Defines volume setting of each single input separately.
- Version | System Info => Soft | Hardware version.
- Reset Everything => Resets all settings to factory defaults, also erases all channel settings.
