TO RESET THE UNIT [SELF CHECK]
- Press simultaneously "Volume(-)" on the front panel of the TV and 'Timer" button on the remote control.
TO ENTER SERVICE MODE
- Adjust "Off Timer" to [30] minutes.
- Press "Volume (-)" on the front panel of the TV and "Recall" button on the remote control simultaneously. After a couple of seconds, "CHK1" should appear on the right upper side of the screen.
- To change the memory data, press simultaneously "Mute" & "Volume (-)" buttons, while OSD is still in 'CHK1' mode.
- Press key [2] to move forward, and key [8] to move backward each page in the memory. For example: Memory position is (100). After pressing [2] the cursor will go to position '0F8', and after pressing [8], the cursor will go to position '108'.
- To change the values in memory, use "Volume (+) & Volume(-)" buttons on the remote control.
- After adjustment, the OSD will change to 'Red' colour. Press '0" to memorize the adjustment, and the OSD will change to 'Green' colour.
- To alter CHK 1 mode to CHK 2, CHK 3 or CHK 4 mode, press [2] key to move forward and [1] key towards back.
