To call up Service Mode.
- Press "i" [INFO] button on the remote control.
- Enter digits {8=>5=>0=>0} in sequence with in 3 seconds.
BUTTON FUNCTIONS
- "i" => Call up Dialogue Center | Close Down the Menu.
- " P+ \ P- " => Call up dialogue line {point of menu}.
- "Left | Right" => Call up Menus | Changing Settings.
- "TXT" => to EXIT from service mode.
SOFTWARE VERSION NUMBERS
The software version number is shown on the lower part of the Service Menu. For example:
_________________________________________________________________________________SBL 1024.EU 01 T00 v1.13
30|11|07 16:23:10
_________________________________________________________________________________
TV SOFTWARE
- Press "AV' button.
- Select "DIGITAL TV" with buttons {P+ | P-} and press "OK".
- Press "i" button.(Main Menu).
- Select "Features" with {P+ | P-} button & press "OK".
- Select "Digital Features" with {P+ | P-} button, and call up with "OK" button.
- Enter the digits {8500}.
- The version number of software will be displayed.
- Press "i" button, to close the software report.
HOTEL MODE
Maximum volume is limited and there is no access to "Preset List" and "Setup" is activated Hotel Mode.
- Call Up: "i" => 8500 => [P+ \ P-] => Option => Right button => [P+ \ P-] => Hotel => {Left or Right} button => "AVAIL".
- Maximum Volume: "i" => 8500 => [P+ | P-] => "OPTION-1" => 'Right Button => [P+ | P-] => "HOTEL VOLUME" => [Left or Right button] => {Select data value} [Data value can be selected in between "0 to 63"]
SPECIAL FUNCTIONS AT ACTIVATED HOTEL MODE
- The maximum volume can be adjusted in the additionally menu item"Maxvol" in the sound menu.
- In addition there is access to the menus "Preset List" and "Channel Settings"until the set is switched Off (Standby).
- Call Up: "i" => 'Sound' => "OK" => "4658"
DISPLAY
If no picture is visible because of a wrong panel is adjusted, can change the setting by "Blind" adjust. The following sequence of operation steps must be repeated until the picture is shown on the panel.
Call Up: "i" => '8500' => {Right button} => {P-ve button 4 times} => {Right button} => "TXT" => Switch set Off and On.
If picture is visible, then repeat the sequence once again and adjust the correct type of panel; according to panel display label.
