Friday, July 20, 2012

DURABRAND DBTV2501 SERVICE MODE



DURABRAND DBTV 2501 SERIES TVs

  • To enter the service mode, Press Both Set key and Remote key for more than one second.
  1. Vol-Min => remote key [0] => Releasing of V-Chip Password.
  2. Vol Min => remote key [6] => Initialization of Factory. [do not use this for normal servicing]
  3. Vol Min => remote key [8] => power On Total Hours will be displayed.  Can be checked of initial data of Memory IC.
  4. Vol Min => remote key [9] => display of adjustment menu on screen.
CONFIRMATION OF USING HOURS
  • Set the Volume to Minimum.
  • Press both 'Volume Dn' button on the set, and channel button [6] on the remote control for mre than 1 second.
  • After confirmation of using hours, turn Off Power.
DISPLAY

INIT  00  83 => INITIAL SETTING CONTENT OF MEMORY IC. [00=ADDRESS; 83=DATA]
CRT ON  0010 => POWER ON TOTAL HOURS.  =  { (16*16*16*thousands digit value) + (16*16* hundreds digit value) + ( 16* tens digit value) + ( ones digit value)}.

ADJUSTING METHODS
  1. Enter data set mode, by setting volume to 'Minimum'.
  2. Press both 'Vol Dn' button on the TV set, and 'Channel button [6] on the remote control for more than one second.
  3. 'Address' and 'Data' should appear.
  4. 'Addresses' is now selected should 'Blink'.  Using the Set + or - ve keys on the remote step through the address until required address to be changed is reached.
  5. Press 'Enter' to select the data.  When data is selected, it will 'blink'.
  6. Again step through data using Set +ve or _ve until required data value has been selected.
  7. Press 'enter' will take back to 'Addresses' for further selection if necessary.
  8. Repeat steps [3] to [6] until all data has been set.
  9. When satisfied correct data has been entered, turn Power Off to finish Data Input.
  10. The unit will now have the correct data for the new Memory IC.