Saturday, July 21, 2012

NEC - DTE29U1TH SERVICE MODE



TO SWITCH THE SET TO SERVICE MODE

  • Select program number [91].
  • Adjust 'Sharpness' to minimum value, and exit all menu.
  • Quickly press the key sequence [ RED=>GREEN=>MENU].
  • To exit service mode, press 'Menu' key or Operate Standby key.
  • In service mode, press 'OK' to stop the micro controller.  The I2C bus is free and the set can be controlled by external equipment. 
  • Press 'OK' again to allow the micro controller to control the set again.