Friday, July 20, 2012

DYNEX PRIMA - DXLCD22 09 LC22HV40 SERVICE MODE




SERVICE MODE
  • Press  [Input => 2 => 5 => 8 => 0] in sequence to enter factory menu.
  • Press 'Up' / 'Dn' button on the remote control, to move cursor to adjustment page of level-one factory menu, and then press 'Enter'.
  • Press 'Up' / 'Dn' to move the cursor Up or Down.
  • When the cursor move to a certain adjust item, press 'Left' or 'Right' buttons to adjust the data value to selected item.
  • Press 'Menu' to Exit to the previous factory menu.
  • Press 'EXIT' to exit the factory menu.
  • After exit factory menu, press 'Sleep' to enter factory menu again as long as power is On.
  • "Power On'" mode item of 'Other setting' menu:  On=Turn On.  Off=standby.  Memory=memory function of turn On.
PRESETTING BEFORE EX-FACTORY

     Enter the factory menu and select 'Shipment'.  The unit will preset the data automatically.  Perform the step after factory menu adjustment. SHIPMENT will perform the steps below.
  1. Clear the program information of the channel.
  2. Clear V-Chip information.
  3. Default setting of user analog.
  4. Set Menu language to English.
  5. set AIR / CABLE to AIR.
  6. Power On mode is Off.