DAEWOO - DLX 20J1BHS - LCD TV SOFTWARE UPDATE
- After insert CD to CD ROM, open the folder.
- Install WISP 3.3 [double click the WISP3.3,exe file.
- Press 'Next'.
- Enter User name and Company name.
- Agree licence agreement, and press next.
- Select the 'Complete'.
- Press 'Next' button.
- Select 'Yes'.
- Select 'Yes. Select 'OK'.
- Select 'OK'.
- Select 'I want to restart my computer", and press Finish. Wait till computer restarts.
- Software upgrade.
- Open the SVC cover for upgrading.
- Open the SVC cover.
- Connect the correct cable for each software.
- UOC upgrade.
- Connect the correct cable wire in P201 for UOC upgrading. Real wire connection is the right side of P201.
- Connect jumper in P103.
- Start WISP
- Select UOCIII NIF 256.
- Set the 'Define time" 2ms.
- IIC configuration setting.
- Select 'Single Master"
- Select "100Kbits/sec"
- Select 'LPT 1"
- Press "OK".
- Browse File.
- Press 'Browse'.
- Select 'Target file'.
- Press 'Open'.
- Upgrade.
- Start "Auto Execute"
- Finish.
- Scaler Upgrade.
- Connect correct cable wire in P201 for scaler upgrading. Real wire connection is the left side of P201.
- Connect jumper in P103.
- Start ISP tool.
- Find the "ISP_TOOL" Icon.
- Click and execute tool.
- Configuration setting.
- Select "SST/ATMEL" device.
- Press "Select Intel HEX file..."
- Select the target HEX file.
- Press 'open'.
- Upgrade.
- Check "Auto Reload".
- Upgrade "Erase-->Program-->Verify" in sequence.
- Finish.
- NVM Reset. (All EEPROM Data Reset).
- If you upgrade the UOCIII part, then must do NVM Reset.
- Press "S6" key in SVC remote controller.
- Press 'right" direction key in SVC remote controller.
- The TV will turn OFF and ON automatically.
- Finish.
- Shipping Reset.
- If you upgrade the UOCIII part, then must do "Shipping" Reset.
- Press "S12" key in SVC remote controller.
- Can see "Shipping Ok" on RF module. Be sure to wait until display on the screen "SHIPPING OK"
- Turn OFF the TV set.
- Finish.