SONY BLU-RAY PLAYER - BDVE780W BDVE980W BDVE985W Checking Method of Network Operation]

part-2

CHECKING METHOD OF NETWORK OPERATION

It is necessary to check the network operation when replacing the MB-141 board.  Check the operation of wireless and wired LAN according to following method.

• Necessary Equipment:  Wireless access point with Router function [AP]

1. Press the [Home] button on the remote control to enter Home Menu.
2. Press "Up" / "Dn" and "Right' / "Left"  buttons to select 'Network Settings => Internet Settings" and press the |+| button on the remote control.
3. Press "Up" of "Dn" buttons on the remote control to select "Wireless Setup (built in)", and press the |+| button.
4. Press 'Up/Dn' buttons on the remote control to select 'SCAN", and press |+| button.
5. The system will start searching for access points and displays a list of available network name [SSID].
6. Check the access point [SSID] is displayed on the searching result.

CHECKING METHOD OF WIRED LAN OPERATION

1. Connect the main unit to the Router or the hub etc: with the LAN cable.
2. Press the [Home] button on the remote control to enter home menu.
3. Press [Up/Dn and Right/Left] buttons to select 'Network Settings => Internal Settings' and press |+| button on the remote control.
4. Press 'Up/Dn buttons on the remote control to select 'Wired Setup', and press |+| button on the remote control.
5. Press "Up/Dn and Right/Left" buttons to select "Auto" and press |+| button on the remote control.  
6. Press [==>] button on the remote control.
7. Press 'Up/Dn buttons to select "Save & Connect", and then press |+| button on the remote control.
8. When 'Internet Setting is now Complete." appears, then press |+| button on the remote control.
9. Press [home] button to enter home Menu.
10. Press 'Up/Dn' 'Right'/ 'Left' buttons on the remote control to select "Network Settings => Internet Settings" and press |+| button on the remote control
11. Press 'Up/Dn' buttons to select 'Network Connection Diagnostics"and then press |+| button on the remote control.  
12. Press 'right/Left' buttons on the remote control to select "Start", and press |+| button.
13. Check that IP address can be acquired