TO ACCESS ALIGNMENT MODE
- Press and hold the volume down / - button on the front panel of the unit and press the status [ + ] button on the remote control 3 times quickly within 1 second, this will place the unit into the CAT menu (Main service mode).
- Press the STR button on the remote control.
- Select the alignment Subject by the UP or DOWN button of the Cross buttons on the remote control.
- Select the alignment item by the LEFT or RIGHT buttons of the Cross buttons on the remote control.
- Adjust optimum setting by Volume Up / + and Down / - buttons.
- To exit the IIC mode, press the menu button on the remote control.
- To exit the CAT mode, access the ID mode by the down button of cross buttons and switch off the main power and on again.
NB:
Never access this mode, and adjust any data values set there, if you are not
qualified to do these alignments.
Improper settings to data values here, might make the TV irreparable.
