It is possible for the user to
upgrade the main software via the USB port. This allows replacement of a
software image in a stand alone set. A description on how to upgrade the main software
can be found in the DFU or on the Philips website.
MAIN SOFTWARE UPGRADE PROCEDURE
In “normal” conditions, so when there
is no major problem with the TV, the main software and the default software
upgrade application can be upgraded with the “autorun.upg” (FUS part in the
one-zip file). This can also be done by the consumers themselves, but they will
have to get their software from the commercial Philips website or via the
Software Update Assistant in the user menu. The “autorun.upg” file must be
placed in the root of your USB stick.
HOW TO UPGRADE
- Copy the “autorun.upg” file to the root of an USB stick.
- Insert the USB stick in the side I/O while the set is “on”.
The TV will prompt an upgrade message.
Press “Update” to continue, after which the upgrading process will start. As soon
as the programming is finished, the set must be restarted.
In the “Setup” menu you can check if
the latest software is running.
TO COPY THE NVM DATA [TO / FROM] USB
- Insert the USB stick into the USB slot while in SAM mode.
- Execute the command "NVM Copy" > "NVM Copy to USB", to copy the NVM data to the USB stick. The NVM filename on the USB stick will be named "L11M12L_NVM_T2U.BIN" (this takes a couple of seconds).
TO WRITE NVM DATA TO TV
- First, ensure (via a PC) that the filename on the USB stick has the correct format: "L11M12L_NVM_U2T.BIN".
- Insert the USB stick into the USB slot while in SAM mode.
- Execute the command "NVM Copy" > "NVM Copy from USB" to copy the USB data to NVM (this takes about a minute to complete).
To write an NVM mask to the TV, ensure
that the mask has the correct format: "L11M12L_NVM_U2T.MAK" (0x00 to
write protect, 0xFF to overwrite).
Important: The file must be located in the "/Repair"
directory of the USB stick.
TO COPY EDID DATA [TO / FROM] USB
Insert the USB stick into the USB slot
while in SAM mode.
Execute the command "NVM
Copy" > "EDID Copy to USB", to copy the EDID data to the USB
stick. The filename on the USB stick will be named "L11M12L_EDID_T2U.BIN"
(this takes a couple of seconds).
TO WRITE EDID DATA TO TV
- First, ensure (via a PC) that the filename on the USB stick has the correct format: "L11M12L_EDID_U2T.BIN".
- Insert the USB stick into the USB slot while in SAM mode.
- Execute the command "NVM Copy" > "EDID Copy from USB" to copy the USB data to EDID (this takes about a minute to complete).
Important: The file must be located in the "/Repair"
directory of the USB stick.
TO COPY CHANNEL LIST [TO / FROM] USB
- Insert the USB stick into the USB slot while in SAM mode.
- Execute the command "Channel list Copy to USB", to copy the channel list data to the USB stick. The filename on the USB stick will be named "L11M12L_CHTB_T2U.BIN" (this takes a couple of seconds).
TO WRITE CHANNEL LIST DATA TO TV
- First, ensure (via a PC) that the filename on the USB stick has the correct format: "L11M12L_CHTB_U2T.BIN".
- Insert the USB stick into the USB slot while in SAM mode.
- Execute the command "Chanel list Copy from USB" to copy the USB data to the TV (this takes about a minute to complete).
