- When IC802 (EEPROM) is replaced, IC801 (CPU) will automatically write the initial reference data into IC802 for basic TV operation. However, the bus data should be checked and some bus data should be set up before attempting the service adjustments.
INITIAL BUS DATA SETUP
Note: When IC802 (EEPROM)
is replaced, following Service Menu should be set up for proper TV operation
before attempting the service adjustments.
NO.01 RFAGC (Adjust the data 06 to10).
NO.05 V-SCO (Adjust the data 17 to
11).
NO.06 V-LIN (Adjust the data 15 to
16).
NO.11 VLI60 (Adjust the data +1 to
0).
NO.19 RDRIV (Adjust the data 63 to
64).
NO.20 GDRIV (Adjust the data 07 to
08).
NO.21 BDRIV (Adjust the data 63 to
64).
NO.24 B-YD (Adjust the data 10 to
08).
NO.25 R-YD (Adjust the data 10 to
08).
NO.68 AFCAV (Adjust the data 00 to
01).
NO.81 POMT (Adjust the data 12 to
08).
NO.82 CHMT (Adjust the data 12 to 05
NO.84 RELAY (Adjust the data 80 to
20).
NO.85 CCD (Adjust the data 26 to
31).
NO.300 R00 (Adjust the data FF to
93).
NO.301 R01 (Adjust the data FF to 0E)
NO.302 R02 (Adjust the data FF to
00).
NO.303 R03 (Adjust the data FF to
00).
NO.304 R04 (Adjust the data FF to 01)
NO.305 R05 (Adjust the data FF to 00)
NO.306 R06 (Adjust the data FF to 00)
NO.307 R07 (Adjust the data FF to 00)
NO.308 R08 (Adjust the data FF to 21)
NO.309 R09 (Adjust the data FF to 95)
NO.310 R10 (Adjust the data FF to 50)
NO.311 R11 (Adjust the data FF to 00)
NO.371 R71 (Adjust the data FF to 00)
NO.372 R72 (Adjust the data FF to A2)
SERVICE ADJUSTMENT - 1
TO ENTER SERVICE MENU
- While pressing the MENU button on the television, press the Number Key 2 on the remote control unit. The Service Menu now appear.
ADJUSTMENTS
- Press the Cursor ▲/▼ or CHANNEL UP/DOWN button on the remote control handset to select the desired service menu item you want to adjust.
- Use the Cursor + / - or VOLUME + / - button to adjust the data. The + or - button will increase or decrease the data sequentially.
TO EXIT SERVICE MENU
- Press the MENU button to turn off the Service Menu display. The data that is set in the service mode is stored into the memory IC automatically.
SERVICE ADJUSTMENT - 2 [MTS ADJUSTMENT]
- TO ENTER SERVICE MENU: While pressing the MENU button on the television, press the Number Key 3 on the remote control unit. The Service Menu now appear.
- ADJUST: Press the Cursor ▲/▼ or CHANNEL UP/DOWN button on the remote control handset to select the desired service menu item you want to adjust.
- Use the Cursor + / - or VOLUME + / - button to adjust the data. The + or - button will increase or decrease the data sequentially.
TO EXIT
Press the MENU button to turn
off the Service Menu display. The
data that is set in the service mode is stored into the memory IC
automatically.
