UPGRADE SOFTWARE
Tips: this software tool is used to upgrade the relevant
model of MST718BE solution, so it is unnecessary to install. Open this software
and then you may operate as follows:
- First connect the upgrade tool: the parallel line connect the PC parallel port, the VGA line connect the TV unit VGA port, and select the TV unit to “ANALOG TV” source. The upgrade step as follows.
- After opening Mstar ISP Utility V4.0.5 software, the following interface appears.
- If it is the first time for you to use this software tool,
please click the “Config” button, confirm whether the default
configuration is correct. If not, setup this configuration parameter.
- Click the “Device” button to select the “Pm25LV040” device, then double click to confirm.
- After selecting the device, click “Read” button to read the files that need to upgrade.
- After reading files, click “Auto” button and confirm the parameter is correct, if Ok, click “Run” button to upgrade the software.
- If the software update is not Ok, please click the “Run” button and upgrade the software again.
FACTORY MENU DESCRIPTION
- Under the ATV source, Press the green button on the remote control, then press the button SELECT on the remoter control for about 5 seconds to enter factory menu.
BLOCK DIAGRAM
