Used tuner _ Philips UV1316
Details
The UV1316 tuner belongs to the UV 1300 family of tuners, which are designed to meet a wide range of applications. It is a combined VHF, UHF tuner suitable for CCIR systems B/G, H, L, L’, I and I’. The low IF output impedance has been designed for direct drive of a wide variety of SAW filters with sufficient suppression of triple transient.
Features:
- Member of the UV1300 family small sized UHF/VHF tuners
- Systems CCIR: B/G, H, L, L’, I and I’; OIRT: D/K
- Digitally controlled (PLL) tuning via I2C-bus
- Off-air channels, S-cable channels and Hyper band
- Compact size
- Complies with the requirements of radiation, signal handling capability and immunity conforming to European standards “CENELEC EN55020” and “EN55013”.
Pinning and Voltage details
24LC02 EEPROM IC
General description.
24AA02/24LC02B (24XX02*) is a 2 Kbit
Electrically Erasable PROM. The device is organized as one block of 256 x 8-bit
memory with a 2-wire serial interface. Low-voltage design permits operation
down to 1.8V, with standby and active currents of only 1μA and 1mA,
respectively. The 24XX02 also has a page write capability for up to 8 bytes of data.
Features
- Single supply with operation down to 1.8V
- Low-power CMOS technology -1mA active current typical -1μA standby current typical (I-temp)
- Organized as 1 block of 256 bytes (1 x 256 x 8)
- 2-wire serial interface bus, I2C™ compatible
- Schmitt Trigger inputs for noise suppression
- Output slope control to eliminate ground bounce
- 100 kHz (24AA02) and 400 kHz (24LC02B) compatibility
- Self-timed write cycle (including auto-erase)
- Page write buffer for up to 8 bytes
- 2ms typical write cycle time for page write
- Hardware write-protect for entire memory
- Can be operated as a serial ROM
- Factory programming (QTP) available
- ESD protection > 4,000V
- 1,000,000 erase/write cycles
- Data retention > 200 years
- 8-lead PDIP, SOIC, TSSOP and MSOP packages
- 5-lead SOT-23 package
- Pb-free finish available
- Available for extended temperature ranges: - Industrial (I): -40°C to +85°C - Automotive (E): -40°C to +125°C.
PINNING & DETAILS
