VIEWSONIC - N3235W1M 32 INCH LCD TV ENTERING SERVICE MODE ADJUSTMENTS

TO ENTER SERVICE MODE

• Press 'Power" 'Up button' and press Enter.  

• Test, display modes & Patterns.

1. Timing 1366*768@60Hz.
2. Pattern 16*12 pane.
3. Select EEPROM INITIAL and press Enter. The act of EEPROM INITIAL is completed when EEPROM INIT disappeared.

• Color Temperature Adjustment.

1. Timing 1360*768@60Hz.
2. Pattern: 16 gray scale.
3. TV should be run-in and warm up for at least 30 minutes.
4. Make sure the distance between Sensor of the CA110 and TV is about 20cm.

Color Temperature Adjusting

1. Under the picture 16 gray scale of VGA source, select 'White Balance' and press 'Enter'.  The color warm will auto adjust.  The act of White Balance is completed when the picture is steady.
2. After adjusting the switch to 'Full white' check the value of each color. Preset color for N3235WM [x=0.283+/-0.015.  y=0.298+/-0.015.
3. Under picture NTSC color bar of YPbPr source, select 'White Balance' and press 'Enter'  The color warm will auto adjust.  The act of EHITE BALANCEL is completed when EHITE BALANCEL disappeared.
4. After adjusting the switch to Full White, and check the value of each color.